Show school pride with Customized School Decal for your Car or window.
Please provide school initials and Graduation year.
Die cut vinyl decal can be put on any smooth, non-porous, flat surface.
Made from permanent outdoor vinyl; it can be removed but not reused. If applied correctly, the life span of decal is 3-5 years based on environmental factors, per manufacturer. Please clean your surface before applying to assure there is nothing on the surface to prevent it from adhering; NOT meant for use on walls.
* Measures Approximately 2" H x 11" W (Depending on length of School Initials)
PLEASE READ DECAL APPLICATION INSTRUCTIONS BEFORE APPLYING!
WE ARE NOT RESPONSIBLE FOR ANY DECALS APPLIED INCORRECTLY.
APPLICATION STEPS
Step 1 - Clean the area thoroughly with rubbing alcohol or soap and water. Do not use a glass cleaner because it will leave a residue behind that will prevent the decal from adhering well.
Step 2 - Rub a squeegee or credit card firmly across the decal through the transfer tape (side with grid lines) to prepare it for application. This ensures the decal will cling to the transfer tape and removes any air bubbles that may have formed.
Step 3 - Peel the backing off the decal. (Backing may be clear or white depending on manufacturer) If the decal clings to the backing, slowly replace the paper backing and repeat Step 2.
Step 4 - Slowly lower the decal onto the surface and rub it in place firmly with a squeegee or credit card.
Step 5 - Slowly peel the clear transfer tape off at an angle. Be careful not to pull the decal off the surface. If decal pulls away from the surface repeat Step 4.
FOR CUSTOM DESIGNS SEND US A MESSAGE.